← 返回文章

关于Ubuntu的ip设置

/etc/network/interfaces 打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载. 1\. 以DHCP方式 配置 网卡 编辑文件/etc/network/inter…

#Ubuntu
Ubuntu

/etc/network/interfaces 打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载.

1. 以DHCP方式配置****网卡

编辑文件/etc/network/interfaces: sudo vi /etc/network/interfaces

并用下面的行来替换有关eth0的行: # The primary network interface - use DHCP to find our address auto eth0 iface eth0 inet dhcp

用下面的命令使网络设置生效: sudo /etc/init.d/networking restart 也可以在命令行下直接输入下面的命令来获取地址

sudo dhclient eth0 ** 2. 为网卡配置静态IP地址**

编辑文件/etc/network/interfaces:

sudo vi /etc/network/interfaces

并用下面的行来替换有关eth0的行:# The primary network interface auto eth0 iface eth0 inet static address 192.168.3.90 gateway 192.168.3.1 netmask 255.255.255.0 #network 192.168.3.0 #broadcast 192.168.3.255

将上面的ip地址等信息换成你自己就可以了.用下面的命令使网络设置生效: sudo /etc/init.d/networking restart

3. 设定第二个IP地址(虚拟IP地址)

编辑文件/etc/network/interfaces:

sudo vi /etc/network/interfaces

在该文件中添加如下的行: auto eth0:1 iface eth0:1 inet static address 192.168.1.60 netmask 255.255.255.0 network x.x.x.x broadcast x.x.x.x gateway x.x.x.x

根据你的情况填上所有诸如address,netmask,network,broadcast和gateways等信息. 用下面的命令使网络设置生效: sudo /etc/init.d/networking restart

4. 设置主机名称(hostname)

使用下面的命令来查看当前主机的主机名称:

sudo /bin/hostname

使用下面的命令来设置当前主机的主机名称: sudo /bin/hostname newname

系统启动时,它会从/etc/hostname来读取主机的名称.

关于设置主机名称的更多信息,请访问这里

5. 配置DNS

首先,你可以在/etc/hosts中加入一些主机名称和这些主机名称对应的IP地址,这是简单使用本机的静态查询.

要访问DNS 服务器来进行查询,需要设置/etc/resolv.conf文件. 假设DNS服务器的IP地址是192.168.3.2, 那么/etc/resolv.conf文件的内容应为:

search test.com nameserver 192.168.3.2